Industry News-Shine Machinery

Technical requirements for rotary cut veneer dryer

It is understood that the rotary veneer dryer is a continuous boring equipment for mass production, which is used for the boring of sheet, strip, granular and some paste materials with good air permeability. It is especially suitable for high moisture content and heat sensitive materials such as

Learn more

2024/04/30 17:22

How does the veneer dryer work

Wood veneer needs to be dried before use, so that the wood is not prone to problems in future use, and the dried sheet is easier to save. Here's a look at how the dryer works.Wood veneer into the dryer before, after treatment, divided into the same thickness of the plate, into the mechanical

Learn more

2024/04/29 14:41

What is the purpose of drying wood in veneer dryer?

1, prevent wood deterioration and decay, extend the life of wood products.Wet wood stacked in the outdoor air for a long time, if no corresponding treatment measures are taken, it is easy to cause rot and insect pests. Reducing the moisture content of wood to less than 20% can greatly reduce the

Learn more

2024/04/29 14:33

What is the purpose of drying wood in veneer dryer?

In the woodworking industry, proper wood drying is far more than a routine step—it is a critical process that directly impacts product quality, operational efficiency, and long-term sustainability. By reducing wood moisture content to optimal levels, manufacturers can unlock a range of benefits

Learn more

2024/04/28 17:25

Veneer dryer product features

Rotary cutting veneer dryer equipment has the characteristics of fast and monotonous, good uniformity, high energy efficiency ratio, small footprint, no environmental pollution, etc., can be widely used in various wood drying treatment. Equipped with infrared temperature measurement, low noise

Learn more

2024/04/28 17:17

Rotary cut veneer dryer equipment Product advantages

1. Multi-band automatic temperature control, high temperature alarm, humidification, moisture drainage, punctual switching machine, suitable for wood secondary drying, balance wood moisture content.2. Fast heating, uniform heating, less heat loss, can be combined disassembly, easy to move, suitable

Learn more

2024/04/27 15:09

Introduction to veneer dryer

The rotary veneer dryer is used for drying wood, which has the advantages of energy saving, reliability, short cycle, high quality and low cost. Widely used in all kinds of wood processing enterprises, especially suitable for wood products export enterprises. HGG series drying equipment, during

Learn more

2024/04/27 15:04

What is the principle of veneer dryer drying？

The veneer dryer is required to transfer heat and quality together during the drying process to ensure that the wet vapor partial pressure (concentration) on the surface of the material is higher than the wet vapor partial pressure in the external space, and that the heat source temperature

Learn more

2024/04/25 17:46

What is the reduced speed drying stage of a veneer dryer?

The drying rate of the material in the veneer dryer equipment depends on the surface evaporation rate and the dispersion rate of the internal wet separation. Generally, the drying rate in the early drying stage is controlled by the surface vaporization rate. Then, as long as the

Learn more

2024/04/25 17:39

Veneer dryer is one of the main equipment in the production process of veneer

In the production of veneer and plywood, the veneer dryer stands as a cornerstone equipment, directly determining the quality of end products. As a key player in modern wood processing, Shine Machinery’s veneer dryer combines advanced technology with user-centric design to deliver reliable, high-

Learn more

2024/04/18 14:39

How to improve the drying speed of veneer dryer？

1. Experienced users know that when using the dryer, the speed limit of the drum is not very low, which can improve the contact number of materials and hot air, thereby improving the drying efficiency of the dryer.2. The combination of countercurrent dryer drying should be used to avoid some water

Learn more

2024/04/18 14:09

What are Veneer dryer precautions？

Veneer dryer precautions1. Do not put a lot of veneers at once, in the use of veneer dryer for drying work, pay attention to not in order to save trouble at once placed too much veneer. This situation will affect the drying effect of the veneer, causing a certain degree of damage to the equipment.2

Learn more

2024/04/17 17:37