Industry News

Daily maintenance of veneer dryer1. During normal use,the lubricating oil should be replaced after the fan runs for 72 hours to ensure the normal operation of the fan.2. When starting the equipment,it should be heated first,and then the fan should be turned on.We can't just heat without turning on

As global demand for wood veneer dryers continues to rise—driven by the limitations of traditional natural air-drying methods—proper maintenance has become critical to maximizing equipment performance and lifespan. Natural air-drying, while low-cost, often leads to issues like veneer deformation,

Because the single board dryer is a long and large equipment, it is necessary to install the single board dryer in a correct sequence and method. The correct installation process is as follows:1. Draw the base line: make the cross line and elevation line correctly on the base plate. The burying of

Wood veneer needs to be dried before it is used, so that wood is not prone to problems in the future use, and the plate after drying is easier to save. Here's how the veneer dryer works.Wood veneer before entering the dryer, after processing, can be divided into the same thickness of the plate,

The wood veneer dryer needs to pay attention to some problems when drying wood. Before use, it should start the heating fan and start the speed regulating motor when reaching the drying temperature. The veneer should be entered longitudinally from the feed port, the feed should be straightened, the

Because the veneer dryer machine is a long and large equipment, it is necessary to install the veneer dryer machine in a correct sequence and method. The correct installation process is as follows:1. Draw the base line: make the cross line and elevation line correctly on the base plate. The burying