News Center

1. Heat exchange systemShine heat exchanger adopts step-by-step heat exchange. The specifications of each section of the heat exchanger are different, and the hot air in the heat exchanger can be evenly distributed to the veneer. The moisture content of the dried veneer is uniform, flat, without…
2024/07/31 14:19
Now our engineers have gone to the customer's factory to install the drying equipment. This is the second veneer dryer purchased by the customer, and the customer is very satisfied with the equipment. It is equipped with a biomass combustion furnace (can be equipped with other heat sources), which…
2024/07/26 10:55
Project Background: Addressing Rubber Wood Drying ChallengesRubber wood, a cornerstone of Malaysia’s timber industry, is prized for its versatility in furniture, flooring, and construction. However, drying this species efficiently has long posed challenges: its high moisture content (often…
2024/07/24 10:13
A 2 deck veneer dryer ordered by our Vietnamese customers is ready for shipment. It uses a new axial flow fan, which reduces the power of the whole machine by 38%, saving energy and electricity for you. It uses a biomass burner for heating, which can directly burn the bark, and the dried boards are…
2024/07/19 09:51
Many people do not know how to maintain the veneer dryer to extend its service life. Shine will show you how to maintain the dryer regularly.1. Clean the inside and outside of the dryer regularly to ensure good ventilation and smooth hot air flow.2. Check the connections and components of the…
2024/07/17 10:17
Wood-based panel is wood or other non-wood plants as raw materials, after a certain mechanical processing separated into a variety of unit materials, with or without the application of adhesives and other additives glued board or molded products. It mainly includes three categories of products,…
2024/07/16 11:20
The 2 deck roller veneer dryer purchased by our customer in Buriram, Thailand is currently being installed and equipped with a biomass burner. The customer has purchased one device before. Due to the recent increase in the price of rubber wood veneers, the customer has expanded production and…
2024/07/11 11:45
Pine is considered one of the most difficult woods to dry, mainly due to its wood structure and composition.1. Uneven density: Pine fibers are relatively fine and soft, resulting in uneven density inside the wood. This makes the wood dry at an inconsistent rate, prone to cracking and warping.2.…
2024/07/09 14:13
Recently, the 4 deck fully automatic conveyor dryer machine purchased by our Romanian customer has been tested. It is equipped with a fully automatic veneer feeding and receiving system. Our engineers went to the customer's factory to guide and train the workers. The customer is very satisfied. If…
2024/07/05 10:26
Recently, with the increase in the price of rubber wood veneer, our Thai customers have purchased a new veneer dryer from us in order to expand production. We have completed the production overtime and are ready to ship it to the Thai customer's factory. We have many cases in Thailand to see on…
2024/06/26 14:12
Customers often report that the veneers dried by the dryers they used in the past have cracking problems. What is the reason for this phenomenon?This is likely to involve the internal structure of the dryer and the stability of the dryer's operation.If the foundation is not leveled during the early…
2024/06/19 16:22
The second veneer dryer purchased by our Cambodian customer is already in operation and is equipped with a biomass combustion furnace. It is now a newly upgraded device with a 38% reduction in overall power, which saves energy and electricity. We can also customize it according to your output. The…
2024/06/13 11:23