News Center

1, prevent wood deterioration and decay, extend the life of wood products.Wet wood stacked in the outdoor air for a long time, if no corresponding treatment measures are taken, it is easy to cause rot and insect pests. Reducing the moisture content of wood to less than 20% can greatly reduce the…
2024/04/29 14:33
In the woodworking industry, proper wood drying is far more than a routine step—it is a critical process that directly impacts product quality, operational efficiency, and long-term sustainability. By reducing wood moisture content to optimal levels, manufacturers can unlock a range of benefits…
2024/04/28 17:25
Rotary cutting veneer dryer equipment has the characteristics of fast and monotonous, good uniformity, high energy efficiency ratio, small footprint, no environmental pollution, etc., can be widely used in various wood drying treatment. Equipped with infrared temperature measurement, low noise…
2024/04/28 17:17
1. Multi-band automatic temperature control, high temperature alarm, humidification, moisture drainage, punctual switching machine, suitable for wood secondary drying, balance wood moisture content.2. Fast heating, uniform heating, less heat loss, can be combined disassembly, easy to move, suitable…
2024/04/27 15:09
The rotary veneer dryer is used for drying wood, which has the advantages of energy saving, reliability, short cycle, high quality and low cost. Widely used in all kinds of wood processing enterprises, especially suitable for wood products export enterprises. HGG series drying equipment, during…
2024/04/27 15:04
        The veneer dryer is required to transfer heat and quality together during the drying process to ensure that the wet vapor partial pressure (concentration) on the surface of the material is higher than the wet vapor partial pressure in the external space, and that the heat source temperature…
2024/04/25 17:46
            The drying rate of the material in the veneer dryer equipment depends on the surface evaporation rate and the dispersion rate of the internal wet separation. Generally, the drying rate in the early drying stage is controlled by the surface vaporization rate. Then, as long as the…
2024/04/25 17:39
In the production of veneer and plywood, the veneer dryer stands as a cornerstone equipment, directly determining the quality of end products. As a key player in modern wood processing, Shine Machinery’s veneer dryer combines advanced technology with user-centric design to deliver reliable, high-…
2024/04/18 14:39
1. Experienced users know that when using the dryer, the speed limit of the drum is not very low, which can improve the contact number of materials and hot air, thereby improving the drying efficiency of the dryer.2. The combination of countercurrent dryer drying should be used to avoid some water…
2024/04/18 14:09
Veneer dryer precautions1. Do not put a lot of veneers at once, in the use of veneer dryer for drying work, pay attention to not in order to save trouble at once placed too much veneer. This situation will affect the drying effect of the veneer, causing a certain degree of damage to the equipment.2…
2024/04/17 17:37
How to improve drying speed in a veneer dryer:Firstly, increase material lifting devices within the veneer dryer according to actual production needs to expand heating area and enhance heat exchange conditions for increased output.Secondly, particle size also affects drying efficiency; reducing raw…
2024/04/17 17:30
Veneer dryer precautionsDo not put a lot of veneers at once, in the use of veneer dryer for drying work, pay attention to not in order to save trouble at once placed too much veneer. This situation will affect the drying effect of the veneer, causing a certain degree of damage to the equipment.2.…
2024/04/15 14:49